Wednesday, May 15, 2024

Lyla's Stencil Sensation


 Welcome back for another NEW THEME for the next 2 weeks here on TFJB Inspiration Ave! Lyla here, and I'm starting you off with an early idea you can put together for those weddings and anniversary celebrations that will likely come your way in these next weeks. Linda Coughlin, owner of The Funkie Junkie Boutique set out to challenge her Design Team by asking us to use one of Tim Holtz's new stencils from Stampers Anonymous to bring out some "STENCIL SENSATIONS"! I've gone a bit further with a few other new TH products and included some cute elements for these two Mini Books from Eileen Hull's newest Bigz Die. Come join the celebration: do a little dancing along with me to see what I've done...


Firstly, let's talk shop! Namely: shop at The Funkie Junkie Boutique! ;) HUGE TIM HOLTZ REDUCTION SALE! I scored quite a few items I've wanted for a long time, and also caught a few new ones. But I actually SAVED a TON of $$ it would cost anywhere else. So, RUN & get yours while they last! The list is HUUUUUGE!


Here's what I planned on using for STENCIL SENSATION.

 Secondly: That handy List of LINKS:

Sizzix Thinlits Die Set 15PK – Vault Boutique by Tim Holtz



I began by die cutting some basic cardstock for the extra middle layer (for stiffness) in the cover,
as well as for the pages of the book. I used some TH Memoranda (older stack) Cardstock for the outside of the cover. 
Cover cuts: 2 Memoranda Cardstock 
1 Basic Cardstock
Inside Pages: 2 Cuts of Basic Cardstock for each Page (Front and Back with Ribbon in middle).


I added some Distress Oxide in Vintage Photo to all the edges and creases of the cardstock cuts. And used the same DO Vintage Photo with some DO Antique Linen with my TH water Spritzer onto the Glass Media Mat to smoosh TWO long (rayon or single seam binding) ribbons into. I crushed up both ribbons and held them into tightly wadded balls with my tweezers while I heat dried them, so they would both crinkle up and stay that way.


Here, I am forming the Mini Book's cover by adhering one ribbon with its halfway mark between the BACK(OUTSIDE) LAYER and the MIDDLE LAYER of the cover. This will be the books enclosure tie.
Next, I adhered one end of the other ribbon in between the MIDDLE LAYER and  the FRONT (INSIDE) LAYER. This will be the ribbon that unfurls with pages glued onto it.
 

Above, you can see this book will have 2 pages in it. I wanted to try to make each book a bit different, so one book has 2 pages and the other has 3.


I die cut 2 of the Doilies to use for the outside covers, and hoped to put in some frame cuts but the frame was just a bit too wide.


I took one extra die cut and made them half-sheet pockets.


TIP: Whenever I unpackage a new TH Stencil, I always use a Sharpie Permanent Marker and color HARD onto the bottom numbers, then wipe off the excess with a tissue. This makes it easier for me to store them in order, as well as check off Inventory on Tim's app. For the very first Stencils (that didn't have these indented numbers), the Permie Maker stays up at the top with the number from the TH Inventory List.


It was a bit tricky to get the Stencil to fit in where I wanted it, but it was doable since the design was the same all over it.  I did get a bit antsy and heat-dried the Paste to get it going faster...


...in the meantime, I worked on the flowers for the front of the covers.


After chopping down the original Iris to a smaller version, I came up with a way to add all the colors Larry and Cathy used for their wedding on Saturday; May 11th.


A little Salvaged Patina Distress Oxide went a long way to brighten up the page! I inked the edges of each ChitChat Word with DO Antique Linen and pasted it onto each Flower's note.

Here's "Wedding to Anniversary"...



 We attended the Wedding of one set in our group of Besties. Both were widowed/widower, and I was very happy to see them both find someone to grow older with! Another set out of our group is very close to them and helped get everything ready these last few months. That couple will celebrate their 40th Anniversary in June- just a few weeks before ours (and married by the same Preacher as us)!



Closeup of the TH Deco Feather Stencil- as used with TH Ranger Transparent Crackle Paste. Salvaged Patina Distress Oxide helps give it some "pop" without adding too much blue.


The TH Stamp Set, Forgotten Garden, had just the perfect stamp for these Mini Books!


Packaged up with my signature Gift Tags.

A Wedding is the start of a new life and 
an Anniversary is the continued celebration of that new life together.
My hope for both these sets of our Family
will enjoy the blessings of many more years to come!

As for YOU, my readers; I send out my heartfelt THANKS!
for scrolling down through these celebrations along with me-
sharing such happy, and inspiring, events of life!

Remember that the rest of the fabulous TFJB Design Team will be posting their take on
Inspiration Ave's "STENCIL SENSATION"
every few days. Pop back in often; you won't want to miss even one!

and check out all the BRAND NEW PRODUCTS... as well as the CLEARANCE!
The HUGE $AVING$ are waiting on you... but not for long!

Until next time...

Stay Safe &
HAPPY BLOGGING!!

Saturday, May 11, 2024

Janna's From the Vault

Hello and welcome back to the crafty corner. Today for TFJB Inspiration Ave we are creating with the new Tim Holtz Sizzix From the Vault Dies. I have selected th Vault Watch Gears and World Travel to feature in my mixed media card today.

For detailed video click here.


For supplies I used: Distress Paints Uncharted Mariner, Rustic Wilderness, Black Woot and Tarnished Grass, Black Soot Archival Ink, Sizzix Vault Watch Gears and World Travel, stamp set CMS395 The Professor 2, Mixed Media paper, TH Ranger Brayer, Idea-ology washi tape, Metallic Kraft Stock, Collage Brush and Collage Medium.


Today’s card will be focusing on the new Vault Sizzix Tim Holtz dies. We will also be exploring one of my favourite brayer techniques with Distress Paint. 


First I coated a piece of distress mixed media paper with the distress paint Uncharted Mariner and a collage brush.


Next I put a couple drops of Tarnished Brass on the kraft mat and ran the brayer through it. Then with a light rolling motion I bayered over the base layer of distress paint. By rolling gently over the first layer I was able to get little skippity bits and batches. The goal was to create some visual texture.


I the did the same thing with a tag painted with Rustic Wilderness.


I also completed a third panel with the same technique using Black Soot and Tarnished Brass.


Next I added a layer of Distress Vintage Photo ink over the painted surface. This was applied with a Tiny Blending tool and some Dome Foam.


After I sprinkled water over the top to get some interesting water marks.


For the background piece I stamped over the top of the Distress Paint with some Distress Black Soot Archival ink and the stamp set CMS395 The Professor 2.


For die cutting I started with the globe from the Vault set World Travel and cut it out of Metallic Kraft Heavy Stock.


Then I die cut the pocket watch out of the altered Black Mixed Media Cardstock with the set Vault Watch Gears. For the little land pieces I die cut from the altered Rustic Wilderness painted tag.


Then I added the Pocket Watch die cut on top of the world globe gluing them together with Collage Medium.


After I added some small detail pieces of a little Ari and airplane.


For finishing touches I added some lettering from the set World Travel out of Metallic Kraft Stock.  Then for the sentiment I die cut “dreaming of adventure”. 

After I added a boarder of decorative Idea-ology washi tape.


Thank you so much for joining me here today for TFJB Inspiration Ave. Until next time, happy crafting!

Janna~ 💕🎨💕

I can also be found on :
Instagram: @treasuresofthesea_jannak

YouTube: The Crafty Corner with Janna

Supplies used:







Friday, May 10, 2024

Suzz's Out of the Vault II

 Hi! Suzz here!  I have been playing with the new World Travel dies from Sizzix Out of the Vault II.  I am loving the new mini globe die!


On my desk I had pulled out a variety of background created previously in other projects. I cut them up into ATC size backgrounds and pulled them out to use in my ATC's with the new dies. 

  

The background of this one was a mix of mica stain spray and distress ink stain spray.  It was stamped over with a soft distress oxide ink and text.  

Then the globe was die cut and sponged with distress oxides to layer the world along with the clouds onto the atc.  The plane was cut from an embossed silver background.  

Then I added a cute stamped sentiment.  

Next I  used a similar color scheme background with a kraft base.

The world was die cut from the backdrop paper and the plane was sponged in distress oxide ink. 

The sentiment was stamped to coordinate.  

The globe and plane with arrows all are a great size to use on the ATC's or smaller tags.  The letters are a perfect size for sentiments on a card base. 

Thanks for stopping by! 

Suzz

Products: 

Wednesday, May 8, 2024

Lisa's Out of the Vault

Hello Funkie Junkie fans, Lisa Hoel here! Our focus this time is all about the newest Vault release of Tim Holtz Sizzix dies. They've taken die designs from the past and reimagined them by mixing, matching and changing the sizes. Whether you missed them the first time around or just want to expand the possibilities, these die sets are handy! I used the Vault Boutique and Vault Matchbox sets to create a pair of Mother's Day slimline cards for my Mom and Mother-in-law.

Lisa Hoel for The Funkie Junkie Boutique  #creativejuicefreshsqueezed   #tim_holtz #thefunkiejunkieboutique

I used Gel Press prints from my stash as the backgrounds and layered on stamping and die cut elements. You can find the supplies over at The Funkie Junkie Boutique!

Thanks for stopping by. Keep an eye here on the Funkie Junkie Boutique blog, TFJB Inspiration Ave to see all the inspiring content each week. Don't miss it

Supplies used:

Tim Holtz Stamp Sets - Tiny PrintsCrochet Trims, Ledger Script
Tim Holtz Die Set - 
Vault Boutique
Tim Holtz Die Set - Vault Matchbox
Tim Holtz Die Set - Vault Wildflowers
Tim Holtz Die Set - Flower Field
Tim Holtz Die - Trinket Frames
Distress Collage Medium Matte
Ranger Archival Inks - various

Tuesday, May 7, 2024

Lyla's Out of the Vault

Linda- I totally started this project last night. The one I did was supposed to match with the new TH Dies, and I didn't think it did well enough. My Muse was more pleased with this idea.


Sizzix Vault Dies are back- with the next chapter in a long-awaited line of old favorites from Tim Holtz! Lyla here, introducing one of my new "go-to" Thinlits Set called Watch Gears- straight out of Tim's Vault, and this one is the bee's knee's! I'm sure everyone is excited about the entire Vault set, but we're going to dole them out to you over the next two weeks, with each Design Team Member taking their turn to bring you the latest in Inspiration Ave! Let's get going with this first one; it's simply awesome!


I grabbed another one, but they all went so FAST!
I wasn't able to get a third set before they were all gone.
But, hang on, Sizzix is working hard to get more going.

Meanwhile, here's a list of LINKS to help you find things I used for this make:



I used Th 3D Embosser Mechanics with some Foundry Wax onto a black cardstock,
then trimmed it down to a tag shape.


I sanded the cardstock down a bit then trimmed a sheet of Backdrops Vol 5.


Now I had a main tag and made my own reinforcers for the top.
I also used some leftovers and ragged it all out with the TH Distresser,
then aged it all with some Distress Oxide in Vintage Photo and Black Soot.


TH Out of the Vault Watch Gears... I open mine up and count them out to make sure it's all there.


It's really going to be COOL not to have to haul around the Bigz Dies,
but it's also cool to still have them for heavy duty cutting!


I got busy with a lot of scrap paper stock- just cutting what I wanted.


I make a plan with the dies, take a pic of it and refer to it as needed.


I used my TH Glass Media Mat to space it out evenly.


I used real metal Long Fasteners to secure the gears into the watch.


Then I used Dura Lar for the glass and taped the sides with TH Tissue Tape (retired).


FRONT


A bow from ragged, Distress-Oxided old ribbon.


IdeaOlogy items- some retired.


The gears are all in pastel which I kept unaged/unDistressed. 
My Grandbabies are the gears that keep me going all the time.


Some old TH Ticket Booth


The BACK: The Grandbabies are all characters of many faces & talents that keep me laughing!


That's a wrap for this production!
THANK YOU for joining me for some fun entertainment!

Be sure to check back in at the Inspiration Ave Blog
for more Tim Holtz Vault Die inspirational makes
from TFJB's Design Team- coming up in the next few days!

And don't forget to pop in to The Funkie Junkie Boutique
for all your crafting needs at a price that can't be beat!

Until next time...

Stay Safe &
HAPPY BLOGGING!!

Monday, May 6, 2024

Teri's Out of the Vault

 Teri Wilson - TerisMailbox

Greetings friends. It is Teri with TerisMailbox back for more Tim Holtz fun for The Funkie Junkie Boutique. Just released are four new Vault Dies and I am playing with the Boutique set!

Loving this very aged vintage look created with this great set!

I do have a video here with the details:

Create the Card Base

Start with a piece of A2 size cream or natural Cardstock. Smoosh Worn Lipstick, Spun Sugar and Vintage Photo Distress Inks on a craft mat. Spray with water, run your fingers through to mix and start dipping and drying. Once you are happy with the results, set aside to completely dry. Once dry, trim to 4.0 x 5.25 inches and attach to a craft A2 card base.

Die Cut the Components

Die cut the doily and three banners using Kraft cardstock and the frame with cream cardstock. You will want three to layer. Ink blend the Worn Lipstick and Spun Sugar on cream cardstock and die cut at least 6 of the swirls.

Assemble the Card

Glue the three frames together. Find a photo from Photo Booth. Trim to fit the frame and glue to the frame. Attach the swirls round the frame with the swirls on top and the base beneath the frame.

Add brown ink splatters to the Kraft doily and glue slightly above the middle of the card. Glue the framed portrait on top.

Using CMS 394 Tiny Text stamp and Ground Expresso Archival Ink, add a sentiment to one banner and then glue three together. Use a score board to score folds so the center portion pops up. Use a small piece of red tape on each end to secure the banner in the lower area of the card.

Finally make and use a rose to decorate the top of the frame.

Here is a Home Decor Piece I made at the same time.

I do have another video on it if you are interested: https://youtu.be/K6EjTkaw4fE.


Products Used for the Vintage Card

All of my channel and affiliate links are listed in the Profile on Instagram. I would love to count you as a subbie friend. I appreciate your support. By using my links, I earn a small commission at no cost to you.

Thanks so much for stopping by today! I'd love to have you follow/subscribe on my social media sites InstagramFacebookBlogger and YouTube all named TerisMailbox. Be well. Be creative!