Wednesday, October 18, 2023

Lyla's Mixed Media Madness Journal


T
he next two weeks has The Funkie Junkie Boutique's DT on another new assignment to bring you some Inspiration Ave "Mixed Media Madness"! Pushing through this project was actually rougher than I expected it to be. I've actually been carting this around with me in all of my travels since July, and never seeming to get the downtime to take my time with it. So here it is, the week it's due and life tosses everything it can into my path to this finish line. I've pressed on- simply because it was so FUN to make! I've chosen to use Tim Holtz's Fabric Journal and fill it to bursting with lots of mixed Idea-ology items. My Craft Room was a disaster area while this was being made, but it was worth all the effort! This is going to be a different kind of posting for me, since I'll be showing a lot of finished photos with a few secret tips mixed in. I'm including as many of the Idea-ology items as possible, so be sure to check out the LINKS List.  Ready, set... let's go!


Tim's Fabric Journal has been in my stash since January. I got the urge to finally use it when all the new TH materials started making news. I did get out my old set of fat quarters- jic- but didn't end up using any of it. The journal has a lot of pages in it and it gave me a lot of ideas!


First up was to alter the journal itself for a "background" to add everything to.


The journal comes with its own tie/wrap and I inked it up and heat-dried it the same way as the journal - page by page until it was all distressed.


I spread each page back out and dried it again, while flattening it back out again.


After it was fully dried, and I left it with some heavy books on top for a few hours, I was able to trim off the excess threads to neaten up the edges.

This is where my normal layout changes: in making this journal, it's basically all the same techniques of choosing a piece, cutting it to fit, inking with Distress Inks and Oxides, and then taping/gluing it to the journal pages. I also used my mini sewing machine to add stitches here and there. The harder baseboard Idea-ology items were distressed with various TH Distress Crayons and I've also used a few of the Distress Paints. I basically used for neutral colors: Antique Linen, Black Soot and Ground Espresso.  Glossy Accents was my glue of choice. The rest of the items will be listed at the end. 


Closeup of the FRONT of my Fabric Journal


Tip: I used a half 12x12 sheet of Tim's stack from Correspondence to make this foldout.







 
Tip: Again - using a full sheet from the Backdrops Vol 4, made a foldout.



Dura Lar clear sheets helped make these "dials" look realistic!


Tip: When you need to allow an insert (the standing tag) to easily slide without catching onto Large Fasteners - use some clear packing tape to keep the ends flat and smooth.




Tip: I used some retired Grungepaper to cut some Hardware Findings hinges. I folded them in half to get a double-sided hinge from the top piece on the (retired) die.





Tip: I used this old Circles Frames Die to cut some edges for my "dials" on the boats.


With TH Spinners or without - the Dials look pretty authentic!





BACK

List of LINKS for Products used:



Thanks for joining me on another craft journey on Inspiration AveDon't forget to come back every couple of days, so you won't miss out on more awesome makes from the rest of the Design Team!

Be sure to stop by The Funkie Junkie Boutique for the latest in Halloween and Christmas Tim Holtz products. These are the best prices you'll find (and your browser will tell you so)!

Until next time...

Stay Safe &
HAPPY BLOGGING!!

Friday, October 13, 2023

Suzz's Treasure Chest

Ahoy Matey! Suzz here.  How would you like to see my treasures!  


The beautiful lion from Finnabair's Regal Lion mold was my inspiration to start building a treasure chest.  I was thinking about creating a series of items that would fit in a treasure chest.  I heated up a big batch of gold and black embossing powder and poured that into the molds.  I let them cool off and popped out the pieces.  The embossing powder I had was mixed ended up with more black on the images than gold.  I wanted more gold to be prevalent, so I used the Metallique wax to smear over the surface and add the gold highlights.

You can see the various pieces from the molds mixed in with the other treasures.

Then I decided to work on additional goodies to fill the treasure chest.  I pulled out pearls (Tim Holtz's Bubbles or Baubles work great) and had them ready to put in the treasure chest.   

I also envisioned gold doubloons and decided to create my own.  I started with cut circles die cut  from cardboard.  I covered both sides with versamark ink.  Then they were dipped into the mix of gold and black embossing powder.  Heated up to melt all off the embossing powder.  I repeated this multiple times to increase the depth of the embossing powder on the coins.   You can either re-ink with Versamark and dip back into the embossing powder or heat up the coin holding it with rubber handled tweezer and dip it back in again and melt it right away.   Then to add an image to the gold coin you will ink up the stamp you want to use with versamark and then heat up your coin until the embossing powder is molten or soft and then place the stamp into the heated embossing powder.  Press down and leave to cool off.  Once it is cool you can pull the stamp out and have an impression on the embossed surface and your stamp will be clean.  (I only do this with the rubber stamps) 

There also had to be a treasure map!  I cut a piece of scrap paper and spritzed it with the same mica stain sprays used on the outside of my chest.  After it dried I added stamped script on the inside along with picking up some extra inky stains.  Then it was wrinkled and rolled up and tied with some twine. 

The remainder is a mix of shimmery buttons, old fake jewelry and a watch fob to add to my treasures!

To create the treasure chest: 

  1. I drew a template for my box along with the circle for the arch on the sides of my top. 
  2. I cut all the pieces based on my measurements and template. 
  3. I ran all the cardstock through the texture fade Cracked. 
  4. I sprayed them all with two seasonal mica stain sprays (Fallen Acorn and Unravelled)
  5. I then assembled my box.  I reinforced the inside with sheets of cardboard that were sprayed to coordinate. 
  6. The top was cut in strips to emulate wood strips.  They then were applied to a sheet of cardstock that was attached to the arched ends.   This was also reinforced with a rectangle of cardstock around the bottom.

The decorative trim is the lace dies cut from tissue paper and embossed with gold embossing powder.  They made a beautiful decorative edge around the corners.

Suzz

Products:

Wednesday, October 11, 2023

Lisa's Snow Globe Scene

Hello Funkie Junkie fans! Lisa Hoel here. Our theme this time around is "Make a Scene" so I decided to create a Halloween "snow globe". When the new Idea-ology Display Globe was debuted I was pretty excited because I love snow globes!

Lisa Hoel for The Funkie Junkie Boutique  #halloween #creativejuicefreshsqueezed  #mymakingstory #tim_holtz #thefunkiejunkieboutique #sizzix

Lisa Hoel for The Funkie Junkie Boutique  #halloween #creativejuicefreshsqueezed  #mymakingstory #tim_holtz #thefunkiejunkieboutique #sizzix

Lisa Hoel for The Funkie Junkie Boutique  #halloween #creativejuicefreshsqueezed  #mymakingstory #tim_holtz #thefunkiejunkieboutique #sizzix

There are no mystical techniques used in this project, but here are a few "in progress" photos.


I glued several 
Mischievous cat die cuts together to make a thicker "cat" and glittered it with Nightfall Distress Glitter (seasonal release from a past year).




With a craft knife, I cut the middles of the letters out of the "EEK!" die cut from Big Frights so I could have the cat stepping through.

There you go! I'm looking forward to making a Christmas project using the Display Globe (or several) so subscribe to my Instagram account to see.

Thanks for stopping by. Keep an eye here on the Funkie Junkie Boutique Blog because you are now getting regular doses of expanded (and inspiring) content each week. Don't miss it…

Supplies used:  

Tim Holtz Die Set - Big Frights
Tim Holtz Die Set - Mischievous
Tim Holtz Die Set - Vault Series: Halloween 2021
Tim Holtz Stamp Set - Scared Silly

Tim Holtz Idea-ology - Display Globe
Tim Holtz Idea-ology - Halloween Confections
Tim Holtz Idea-ology - Trick or Treat
Tim Holtz Idea-ology - Halloween Trimmings 2022
Tim Holtz Idea-ology - Memo Pin

Distress Mica Spray - Bubbling Cauldron
Distress Spray - Wilted Violet, Seedless Preserves, Shaded Lavender
Distress Glaze Embossing Powder - Twisted Citron
Distress Glitter - Nightfall
Distress Glitter - Rock Candy



Monday, October 9, 2023

Teri's Dreadfully Wicked Tag Scene

 Teri Wilson - TerisMailbox

Hello and Happy fall! It's Teri with TerisMailbox posting for The Funkie Junkie Boutique. Check out this very spooky scene created with an etcetera tag and layers of spooky goodness!


Love all this darkness, from the Black Grit Stenciling to the Shattered Glass!

I do have a video HERE if you prefer to watch.


Create the Background

Trim a piece of Distress Heavyweight Cardstock to be the size of the Small Etcetera Tag. 


Ink smoosh Villainous Potion onto the tag by smooshing the ink pad on the craft mat and dipping and drying until you are satisfied with the color achieved. Use a second layer of Villainous Potion, Twisted Citron and Carved Pumpkin Spray Stain to achieve a darker layer. Once dry, use Black Soot Distress Ink to fill in the gaps and color the edges.

Stitch black thread around the perimeter of the tag for interest using straight and Zig Zag stitches.

Use THS171 Fractured Stencil plus Black Grit Paste to add the lines on the panel.  Once dry, attach to the Etcetera Tag with Collage Medium.

Create the Spooky Pieces

Choose an Etcetera Window, from the Baseboard Window Set. Add Black Soot Distress Ink to darken the frame.


Attach a Shattered Window Ide-ology piece to the window and trim to size. Use 4 of the 1/4 inch strips from the Bat and Webs Trim to provide dimension and room for the broom and witches. Select your witches from the Halloween Paper Dolls set and trim to fit inside the window. Attach to the tag with collage medium. Add a broom for interest. Use a hot glue gun to stack the strips and add the broom and window to the base. You may need to trim the broom to fit. Add a strip sentiment from the Halloween Baseboard and Transparencies Set. There are three total sentiments on the tag.


Select a web trim plus a shelf with another solid web piece. Paint with black acrylic paint. Glue the web piece to the top of the tag and create a shelf using the other 2 pieces.


Use Crypt Grit Paste to add gray layers to the skeleton heads, gravestone and the shelf. Use the hot glu


Now, let's make a spooky glow in the dark eyeball! Use the new Halloween Grit Paste Glow and spread an even layer on cardstock. Once dry, use the eyeball die set from Trick or Treat Colorize to create the eyeball.


Love how it glows in the dark!


Finally add an Ideo-ology spider colored with red alcohol ink to a sentiment strip and attach to the tag. Use Villainous Potion Distress Ink to color the number 31 and attach.

Thanks so much for stopping by today! I'd love to have you follow/subscribe on my social media sites InstagramFacebookBlogger and YouTube all named TerisMailbox. Be well. Be creative!

Products used: